Internal Repairs Completed to
go with the new Cover and Collar.
Corroding
manholes with infiltrating water can be sealed and relined with various techiques.
MSI incorporates chemical grouting, Cementious fiber mortar with a trowel finish
or applied epoxy coatings. Surface preparation requires a minimum of 2K
PSI hydroblasting. Occasionally up to 10K PSI with a sand injection blast
is needed if rusty reinforcing steel is exposed.
New Cover and Collar on a Manhole
This guy got the short straw
and had to suit up!!
A
waste station at a Napa valley winery from concrete deterioration exposing the
base and rebar. Hydroblasting at 7k psi and sand blasting the rebar inside the
5' x 16' wet well prepared the surface for Neopoxy NP53 structural expoxy which
was then applied to 1 1/2" thick somewhere in beautiful San Andreas.
MANHOLE
REHAB LINKS
|
